» Shepherd #Bb Orchestral Pipe Chanter Reed, 3 strength choices. (IN STOCK)


Shepherd #Bb Orchestral Pipe Chanter Reed, 3 strength choices.  (IN STOCK)

Shepherd #Bb Orchestral Pipe Chanter Reed, 3 strength choices. (IN STOCK)


Quantity in Basket: 
None
Price: 
$17.00
Shipping Weight: 
0.02 pounds

Shepherd #Bb Orchestral Pipe Chanter Reeds designed for Bb pipe chanters. The Shepherd Bb reed is designed to a pitch around 468 (Using a Bagpipe Tuner) and around 442 (Using a Korg Tuner).

Selecting a Pipe Chanter Reed



Selecting a Reed You never see a professional player struggling to play the bagpipe; they always seem relaxed and comfortable. The pipe bag is the correct size, is 100% airtight, stocks are tied in correctly and have no cracks, the blowpipe is the correct fit, the valve is functioning properly and all the joints are hemped correctly (see the past 3 articles). If you have corrected these problems and the pipe is still difficult to play the next thing to address is the pipe chanter reed . Many pipers get into the bad habit of trying to blow reeds that are much too strong for them. Nothing can hamper your technique and expression more than trying to play a bagpipe reed that is too hard for you. Pipe bands are one of the biggest contributors to this problem by insisting that reeds must be stiff and difficult to blow in order to contribute to the sound of the band, don't get suckered into this myth. It is not the goal of this article to teach pipe chanter reed adjustment, (that will come later) but rather to help in your selection of a reed that is within your playing comfort level. The question I am asked the most is "What strength reed should I play easy, medium, strong or something in between"? The answer is none of the above, you have to play a reed that is within your own personal comfort level. What may be a strong reed for one person might be a medium reed for another person.

How do I choose a Shepherd Orchestral pipe chanter reed

Visual Test:
1. The reed should have a nice clean look with no splits down the length of the cane and no chipped corners.
2. Both reed blades should be the same thickness and must fit tight together with no gaps.
3. The blades at the open end should have a nice elliptical shape.

Airtight Test:
Hold the reed in one hand and place a finger over the cane tip's end of the reed to seal it and blow through the reed from the staple end, run a finger of your other hand down both sides of the reed to ensure that no air is leaking from the blades. If the reed is leaking air discard it.

Chanter Test:
Now place the reed of your choice into the reed seat of the pipe chanter and take a deep breath. Form a tight seal with your lips around the lacquered hemp on the pipe chanter reed (not over the hemped end of the pipe chanter) and play the scale from Low A to High A and then back down to Low A. If you can't do this in one breath - the reed is too strong for you to play comfortably, select another reed. When you find a reed that will pass this test, that is the correct strength reed for you in your present playing condition. By following these three steps you should be able to select a reed that will give you many hours of comfortable playing.


Learn by doing!
Pipe Chanter Reeds.

To change the strength and pitch of a pipe chanter reed, if the reed is only slightly too strong:



1. Pipe chanter reed with reed elastic. Wrap the elastic 2 to 3 times around the reed.
2. The higher the elastic, the easier the reed is to play.
3. The lower the elastic, the stronger the reed is to play.
Once you have the reed at a comfortable strength you may have to raise or lower the reed in the reed seat by adding or subtracting hemp in order to achieve the correct pitch.

To change a much stronger reed:
4. Divide the reed into thirds, the top line approximately 1/8" down from the top of the reed and the bottom line approximately 1/4" up from the hemp binding.
5. Fold a piece of 220 grit sand paper over the corner of a table. You are now going to remove material from the middle third of the reed.
6. Hold the reed so that you are sanding the shoulder of one side of the reed then across the flat surface to the other shoulder, repeat this 4 to 5 times, flip the reed and do the same on the other side, then test the reed, if it is still too strong keep repeating till you achieve the strength you are looking for.



Strength:

Quantity: 








Warranty: All merchandise is covered under the manufacturer's warranty; Pipeline is not responsible for these warranties.


Please Read our Terms and Conditions

For more information: Email us at info@pipeline-bagpipes.com



SSL_Cert PayPal
About Us (Store Hours, Location, Etc)         Sitemap         Back to Previous Page

Privacy Policy         Pipeline Bagpipes - (570) 857-7092